Finally, re-launch the browser and enter or If your PC has ipv6 enabled, please disable it during installation. Second, make sure the PC to Extender status LED is green and you have a valid IP address. I connected to NETGEAR_EXT and launched a browser, but why can’t I see the Smart Wizard?įirst, make sure your computer is on DHCP.Then open a new browser and type the URL. In your browser, type the URL, If you still cannot access the Extender, close your browser. Make sure you are on a PC that is connected to the Extender network. How do I change my setup after the Extender is up and running?.On the other end, wirelessly connect the Extender to the PC-in this case, the Extender functions as an access point. The proper usage of the product is to wirelessly connect the Extender to the existing router-in this case, the Extender functions as a client. Universal WiFi Range Extender is designed to work as an AP/client bridge, not an access point. Will the Extender work if I connect it to the existing router by an Ethernet cable?.Once the Extender is configured, simply connect the wired device to the Extender using an Ethernet cable and the device will automatically be connected. The 4 LAN ports are available to connect to Ethernet-enabled gaming consoles, printers, or desktop PCs. Can I use the 4 LAN ports to connect wired devices?.Please follow the instructions in Question 4 to resolve this. When this happens, it is very likely that the Extender is placed at the borderline of the range covered by the existing router. When connecting to the existing network, Smart Wizard keeps asking me for my passphrase, and I am sure I've entered the correct passphrase, what can I do?.Once either condition in Question 1 is met, open a browser and go to to continue the setup process. If so, from the new location, power up the Extender and continue to check the LEDs. Note that you may have to unplug the Extender as you move it to a different location. As you are moving the Extender, continue to check the Link Rate and the PC to Extender Connection LEDs on the front panel until you find a location where either one of the conditions in Question 1 is met. If the Link Rate is red or the Smart Wizard simply cannot connect the Extender to an existing router, please move the Extender closer to the existing router or to a different spot where it provides a better line of sight. Once you successfully connect to the Extender from a computer that is outside the range of your existing router and log into the Smart Wizard will guide you through the process to connect the Extender to an existing router. What if I cannot connect or maintain a good connection between the Extender and my existing router? How do I improve the Link Rate LED from red or amber to green?.If after trying out several spots and the computer is still not able to connect to the Extender, move the Extender closer to the PC as instructed in Question 2. If this straight path is blocked by a thick wall or other materials, move the Extender to a different location that is equal distance between the Extender and the existing router. The best connection is established when there is a clear line of sight between the Extender and the computer you are using. What if I am not able to connect from my computer to the Extender?.As long as either one of the conditions in Question 1 is met, the Extender will function as expected. If there isn't a power outlet at this location or you prefer not to place the Extender at this location, move the Extender closer to the PC. The ideal location to place the Extender is half-way between the existing router and the PC that is outside the range of the existing wireless router. What if there is no power outlet half-way between my existing router and my PC?.The new and most up-to-date firmware will likely correct issues as well as potentially add new and improved features to the product. Having the latest firmware will help increase the stability, functionality and performance of your product. Why do I need to always have the latest firmware on my NETGEAR product?.A workable performance is delivered when the Link Rate LED is amber and the PC to Extender Connection LED is green.The best performance is delivered when both the Link Rate LED and the PC to Extender Connection LED are green.What should the LED status be when the Extender is correctly set up and functional?.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |